对于我们所有的读者:GlædeligJul!(圣诞节快乐!)
您需要什么:
- 一个萨克斯(一把剪刀)
- 四个Papirstrimler(纸条),宽约1厘米,长30厘米
- 绳子(吊死)
怎么做:
1.折叠确切中间的每个条带(使其像书一样关闭)。
2.编织所有四个条,使得折叠的末端“锁”在十字架上互相锁定(脱衣舞,带状 - 内侧串……拉,拉……)
3.弯曲第一折条的上半部分向后,使其位于中央“广场”。
4.使用其余的三个“上”条进行同样的事情。必须将最后一条带拉过第一条滑动的“弯曲”,以锁定其他滑动。(If you’re actually holding the bits of paper in your hands right now, I hope you see what I mean! )
5.现在的星星现在应该看起来像这样:
6.现在是时候提出观点了。八端中的每一个都应弯曲在下面本身和离开从中心出现一个三角形(将其压在桌子上以使其尖锐折叠):
7.用宽松的末端进行循环,然后将其推到刚刚制作的三角形下方的“桥”。向你拉。
8.重复上述步骤,直到获得8星为止。(在前4个之后,您需要翻转恒星。)
9. The ”surface” points may seem complicated, but if you just fail-and-try, you’ll see it’s actually quite achievable… On the previous photo I marked two slips with an X and a Y. Now lift the X slip and pull it back to give space for the Y slip… Make a counterclockwise loop with the Y slip, and push it through the ”corridor” underneath the lifted X slip… Push it all the way through, until a little ”mountain” is formed. That’s the point!
10.重复其他滑动步骤9,直到恒星的每一侧都有4英寸“山脉”。
11.切开末端。这颗星星现在可以使用!